The specification for A5 Flyers
(210X148mm)
Document Trim Size (final size after being cut)
Horizontal Vertical
8.27“ x 5.83" 5.83" x 8.27"
210mm x 148mm 148mm x 210mm
2480 x 1748pixels 1748 x 2480pixels
Full Bleed Size (starting document size)
Horizontal Vertical
8.50" x 6.06" 6.06" x 8.50"
216mm x 154mm 154mm x 216mm
2551 x 1819pixels 1819 x 2551pixels
* Finished artwork should use the full bleed dimensions for best
results
* Please be sure to keep all text within the safe
margin.
We support a variety of file formats for uploading
designs.
Vector Graphic Files is preferrd- vector-based images can be scaled
by any amount without degrading quality. Usually supplied in PDF, AI, EPS or CDR
formats.
Before submitting
your artwork, please check that:
1. The
preferred format is vector graphic files. Usually suppies in PDF, AI,EPS OR CDR
formats.
2. Your artwork is the correct size. Artwork to be 1-up on a single
page document.
3. Bleed is set to exact 3mm
4. The document colour mode set to CMYK
5. All
Rich Black are set to C = 40%, M = 0%, Y = 0%, K = 100%.
6. All fonts are
outlined (converted to curves) or embedded.
7. All links are
embedded.
8. All lines in your artwork
are at least 0.3pt and all text should be at least 8pt using a non narrow style
font.
9. All borders in your artwork
are at least 5mm wide.
10. All images in your artwork are 300dpi when placed
at 100%.
Please Note:
1. If two sides are selected,
your artwork should contain a design for both sides.
2. Also if possible,
please provide crop marks around the artwork.
3. We print in CMYK and not
RGB. Supplying artwork in RGB will effect the final colour.
4. If flyers are
ordered with any additonal option, a PDF proof will always be sent to the
customer. This must be approved before the job can be printed. If not approved
in time, the order may be delayed.
1. Can your flyers be written on?
Yes, they can be
written on, but its recommended that a permanent marker or ball point pen is
used as other pens tend to smudge easily.
2. Do you give a
quality guarantee on your work?
7daysprint stands behind the quality
of its products and services. If you are not satisfied with your purchase from
us, simply contact Customer Service by email within 15 days from the date you
receive it (or the date it was scheduled to arrive), and we will reprint part or
all of your order. In some cases, we may refund the full price of the product(s)
in question, excluding shipping, postage. 7daysprint is committed to customer
satisfaction, and we do everything possible to ensure proper cutting, accurate
color reproduction, and excellent printing quality. However, certain
circumstances are beyond our control and are not covered by this guarantee.
Please check the Term and
Conditions page to note that we cannot be responsible
for.
3. How do I know if my
Order has been Dispatched yet?
It is very easy to find your order.
To view the details and status of your order, you may log in anytime after
placing your order. Listed below are four different status codes for our
workflow.
-In prepress. We check file
availability. If you did not meet artwork requirement, we ask you to revise file
and send us by email.
--Ready to print. If your
artwork is fine to print, our prepress department is preparing your job for
print.
--Finish
printing.
--Shipped.
When your order is
dispatched, it will show as ‘shipped’ which is just after the dispatch
process. The serial number of any post bag or con note is displayed in the
details section. And you can require us to send the tracking number via
email.
4. Are
flyers with gloss paper water-proof?
Unfortunately
not, the paper is like the kind most magazine use and not
waterproof
5. Can you print the colour
as same as that in my design?
At Boostprint we take pride in
matching colours to our clients CMYK proofs. however the following terms and
conditions apply.
1. Print colour may vary from print run to print run and/or
from job to job or from front to back.
2. Boostprint will reproduce colour
from digital files as closely as
possible, but may not exactly match colour
and density due to limitations in the proofing and printing process, as well as
neighbouring image ink requirements.
3. A reasonable variation in colour
between original materials, proofs and the completed order, will be considered
acceptable print quality.
4. It is important to note the technical
limitations of screen, digital and offset printing processes.
5. Where CMYK
designs are used, a higher degree of colour variation is normal. While every
effort is made to reproduce the colours on chemical and professional digital
proofs Boostprint Pty Ltd shall not be liable to reprint or otherwise compensate
the client for a commercially acceptable variation in colour when comparing the
proof to the final product, the disc to paper parts, or throughout a printed
batch of products.
6. Acceptable variations may be up to 10% of selected CMYK
colour values, Colour Matching and Proofing Process.