Document Trim Size (final size after being
cut)
Horizontal Vertical
3.37“ x 2.13"
2.13" x 3.37
85.5mm x 54mm 54mm x 85.5mm
1010 x
638pixels 638 x 1010pixels
Full Bleed Size (starting document size)
Horizontal Vertical
3.44" x 2.20" 2.20" x 3.44"
88.5mm x 57mm 57mm x 88.5mm
1045 x 673pixels 673 x 1045pixels
* Finished artwork should use the full bleed dimensions for best
results.
* Please be sure to keep all text within the safe margin.
We support a variety of file formats for uploading designs.
Vector
Graphic Files is preferrd- vector-based images can be scaled by any amount
without degrading quality. Usually supplied in PDF, AI, EPS or CDR
formats.
Before submitting your
artwork, please check that:
1. The
preferred format is vector graphic files. Usually suppies in PDF, AI,EPS OR CDR
formats.
2. Your artwork is the correct size. Artwork to be 1-up on a single
page document.
3. Bleed is set to exact 1.5mm
4. The document colour mode set to CMYK
5. All
Rich Black are set to C = 40%, M = 0%, Y = 0%, K = 100%.
6. All fonts are
outlined (converted to curves) or embedded.
7. All links are
embedded.
8. All lines in your artwork
are at least 0.3pt and all text should be at least 8pt using a non narrow style
font.
9. All borders in your artwork
are at least 5mm wide.
10. All images in your artwork are 300dpi when placed
at 100%.
Please
Note:
1. If two sides are selected, your artwork should contain a
design for both sides.
2. Also if possible, please provide crop marks around
the artwork.
3. Colours may appear darker when Matt Lamination is
applied.
4. We print in CMYK and not RGB. Supplying artwork in RGB will
effect the final colour.
5. If business cards are ordered with any additonal
option, a PDF proof will always be sent to the customer. This must be approved
before the job can be printed. If not approved in time, the order may be
delayed.
1. Do you have thicker stock?
Yes, we can offer 3
thickness for the plastic white cards: 0.3mm, 0.5mm and 0.76mm. Our standard
finish for 0.3mm cards is smooth matt , standard finish for 0.5mm and 0.76mm
cards is glossy.
2. Can I put a photo on such card stock?
Yes, but please
note the photo may look some different on such card stock.
3.
Can the corners be done a right- angle?
Unfortunately, the standard
corners of all our plastic cards including the frosted business cards are
rounded corners.
4. Do you give a quality guarantee on your
work?
7daysprint stands behind the quality of its products and
services. If you are not satisfied with your purchase from us, simply contact
Customer Service by email within 15 days from the date you receive it (or the
date it was scheduled to arrive), and we will reprint part or all of your order.
In some cases, we may refund the full price of the product(s) in question,
excluding shipping, postage. 7daysprint is committed to customer satisfaction,
and we do everything possible to ensure proper cutting, accurate color
reproduction, and excellent printing quality. However, certain circumstances are
beyond our control and are not covered by this guarantee. Please check the Term
and Conditions page to note that we cannot be responsible for.
5. Can we split our order for 500 into 2 names of 250
cards?
Yes, we can split up into 250 cards for one design, 250 for
another name. But Extra Split fee will be charged for the spliting order. You
can contact us with Email us at info@boostprint.com.au and enquire
direct with our bespoke printing expert. We will give you a quote there.
6. How do I know if my Order has been Dispatched
yet?
It is very easy to find your order. To view the details and
status of your order, you may log in anytime after placing your order. Listed
below are four different status codes for our workflow.
-In prepress. We
check file availability. If you did not meet artwork requirement, we ask you to
revise file and send us by email.
--Ready to print. If your artwork is fine
to print, our prepress department is preparing your job for print.
--Finish
printing.
--Shipped.
When your order is dispatched, it will show as
‘shipped’ which is just after the dispatch process. The serial number of any
post bag or con note is displayed in the details section. And you can require us
to send the tracking number via email.
7. Can you print the colour as same as that in my
design?
At Boostprint we take pride in matching colours to our
clients CMYK proofs. however the following terms and conditions apply.
1. Print colour may vary from print run to print run and/or from job to job
or from front to back.
2. Boostprint will reproduce colour from digital files
as closely as
possible, but may not exactly match colour and density due to
limitations in the proofing and printing process, as well as neighbouring image
ink requirements.
3. A reasonable variation in colour between original
materials, proofs and the completed order, will be considered acceptable print
quality.
4. It is important to note the technical limitations of screen,
digital and offset printing processes.
5. Where CMYK designs are used, a
higher degree of colour variation is normal. While every effort is made to
reproduce the colours on chemical and professional digital proofs Boostprint Pty
Ltd shall not be liable to reprint or otherwise compensate the client for a
commercially acceptable variation in colour when comparing the proof to the
final product, the disc to paper parts, or throughout a printed batch of
products.
6. Acceptable variations may be up to 10% of selected CMYK colour
values, Colour Matching and Proofing Process.
At Boostprint you should only expect high quality business cards
that are cost-effective. Still looking for answers?
Please read our Frequently Asked
Questions page for more commonly asked questions.